SOLD

Chord Electronics QBD76HD Digital to Analogue converter

£4,500 £1,899

This item has recently been sold but we can source similar if required. Don’t hesitate to contact us to find out more.

We have just taken in part exchange this Chord Electronics QBD76HD DAC – owned from new by the previous owner it is in excellent condition and full working order we just do not have the original box or packaging.

Audio Outputs
There is one pair of left & right fully balanced outputs, via Neutrik XLR style connectors and one pair of left & right unbalanced outputs, via gold plated RCA phono style connectors. Each of these will drive down to a 50ohm load. This means that the QBD76HD will work with all known preamplifiers and is able to drive very long audio cables without difficulty. Both audio outputs work at the same time, this allows the QBD76HD to be connected to two pre-amplifiers if needed.

Digital Input Selection
The QBD76HD enables you to use any one of five digital input formats. These consist of two 75ohmSP/DIF2 BNC (COAX) and two AES balanced XLR input (AES) and two plastic fibre optic (Opt) and a USB B type connector (USB1) and USB HD 192KHz (USB2) using the supplied cable. Each of these inputs can be selected by using the selector switch on the top panel of the unit. The switch is located directly above the display, see connection diagram.

The sequence of input selection is as follows;
Function Display
USB HD 192KHz – USB2

Free UK mainland delivery, and within a 50 mile radius of our showroom location receive free dedicated studioAV delivery and installation.

READ FULL DESCRIPTION

Out of stock

Category: Condition:

Chord Electronics QBD76HD Digital to Analogue converter

Product Specification
HARMONIC DISTORTION < -103dB
SIGNAL TO NOISE RATIO >120dB
CHANNEL SEPARATION >125dB @ 1KHz
DYNAMIC RANGE 122dB
DIGITAL INPUTS 2 x 75 SP/DIF BNC Coax 44.1KHz – 192KHz
2 x AES Balanced XLR 44.1KHz – 96KHz, (176KHz-192KHz dual cable)
2 x Plastic fibre optic ( TOSlink ) 44KHz – 96KHz, (176KHz-192KHz
dual cable)
1 x USB ( B type ) 44.1KHz – 48KHz
1 x 4 pin high speed to USB ( A type ) 44KHz – 192KHz
ANALOGUE OUTPUTS 2 x RCA Phono
2 x Balanced XLR
RAM BUFFER SWITCH switches between; No buffering, Minimum buffering and
Maximum buffering
PHASE SWITCH 2 Settings Positive or Negative output phase
SAMPLE FREQUENCIES 44.1Khz – 192Khz (input dependant)
OUTPUT MAX 6V rms. Balanced. 3V rms. unbalanced
OUTPUT IMPEDANCE 75ohm (short circuit protected)
DIMENSIONS IN MM 338 x 60 x 145mm (Width x Height x Depth)
WEIGHT 7Kg

Free UK mainland delivery, and within a 50 mile radius of our showroom location receive free dedicated studioAV delivery and installation.