Offer!

VTL 5.5 Line Pre Amp and S200 Power amp package

£21,725 £10,950

We are excited to be able to offer this exquisite Pre & Power combination from one of the Worlds finest tube amplification companies, VTL.

Both products have originally been sold from New by StudioAV, they are both in excellent condition.

The package is regarded as one of the finest, most musical valve pre/power combinations delivering plenty of power and grip, combined with body and subtlety

If you are considering an Amplification upgrade we strongly recommend you arrange a visit for a demonstration of this package.

please call  to book your appointment or for us to answer any other question – Tel 01753 863300

Category: Condition:

VTL 5.5 Line Pre Amp and S200 Power amp package

Features 5.5 Pre Amp

  • Almost half the price of the TL-6.5 Signature Pre-amplifier
  • Luxurious cosmetics to match with Reference and Signature models
  • Fully balanced differential linestage with increased functionality
  • Optional internally retrofittable phono stage, with user adjustable cartridge loading and gain options
  • Precision-regulated B+ and B- supplies
  • Tube life extender circuit with B+ delay and soft filament ramp on power on
  • Balanced design, low-radiation power transformer
  • Quiet logic: Microprocessor sleep mode, quiet non-matrixing LED display with latching shift registers

Line Stage: All-tube, with lower gain high current 12AU7 circuit and 12AT7 buffer, minimal negative feedback

  • Two balanced /single-ended inputs, five single-ended inputs, one tape in, one balanced out, one single-ended out, one buffered record out
  • Soft-touch relay input select
  • 117-step chip-based differential volume control, with 3-digit display
  • Higher resolution via single higher-resolution attenuator, and software control for balance and offset
  • Switchable gain between normal and low gain
  • Mono control on front panel
  • Fully bi-directional RS-232 control: programmable input offset, any input programmable as pass-through, and input disable, tape monitor and Mono control on front panel
  • Two programmable trigger outputs
  • Full function aluminum metal remote
  • TP-6.5 chassis size with all precision machined aluminum cosmetic

Features – S200

Fully balanced differential circuit – even single-ended signal produces balanced signal at output

Fully balanced differential input and driver stages for increased signal swing, bandwidth and stability

Zero global Negative Feedback

Shorter, faster feedback loop for greater tonal control without phase shift

Superior handling of loudspeaker loads for greater signal stability

The amplifier is unconditionally stable, without the need for capacitor compensation

Tube-like JFET type current source maintains sonic integrity in single-ended mode

Lower impedance output stage for improved loudspeaker control

Proprietary designed interleaving and coupling in the balanced VTL Signature output transformer, for wider bandwidth and zero ringing

Variable user-adjustable DF feedback control to vary output impedance and damping factor for optimal matching to speaker load

Software microprocessor controlled

    • Tetrode/Triode Switchable
    • Auto Bias, Fault Sensing
    • Current in-rush limiting
    • Standby Mute function; with reduced tube current for increased tube life
    • 200 watts per channel in tetrode; 100 watts per channel in triode
    • Uses eight 6550 or KT-88 tubes
    • Adjustable regulated screen supply for stable operating point; discrete regulated input and driver supply for greater signal resolution and tonality
    • Adjustable precision-regulated bias supply for greater signal resolution and noise rejection and improved isolation from mains supply variations; output operating point does not change with AC power fluctuations
    • Autobias and fault sensing system to operate in fully balanced differential mode; amplifier is fully protected against output tube failure; no need for precision matching of output tubes
    • Film bypass of power supply caps for greater HF resolution
    • Extruded aluminum front panel with luxurious, modern look
    • Rack mountable
    • Rigid construction and improved ventilation for lower operating temperature